 u7.jpg |
As you spray the undercoating on make sure you don't leave any bare spots. Keep spraying in a crossing pattern and the texture will come out correct. |
 u10.jpg |
Here is the right side after all the paper is removed. The pattern feathers around the suspension mount and has a uniform coverage on the rest of the panel. |
 u9.jpg |
The coverage on the other side is a little different to replicate the way the original coating would have been sprayed on. |
 u12.jpg |
On the rear I just couldn't bring myself to spatter undercoating all over the frame rails. I masked off the wheel well and shot the inside with a good amount of coating but didn't go so far as to feather the over spray around the rear of the car. If someone wants to change this in the future it would be easy just to mask and sputter some over spray around. |
u9.jpg |
Okay this job is finished for now. When I get ready to mount the fenders we will bring our the Schutz gun again and spray the insides of the fenders and the inner panels but for now it is on to cleaner tasks. |
Page: 1 2